README.cif2xml Information for cif2xml 0.1.1 -- alpha, 29 November 2009 ---------------------------------------------------------------------------- Before using this software, please read the NOTICE and please read the IUCr Policy on the Use of the Crystallographic Information File (CIF) ---------------------------------------------------------------------------- \ | / \ | / \|/ \|/ -- -->>>>>>-- -- c i f 2 x m l ...... CIF COPY PROGRAM /|\ /|\ / | \ / | \ Version 0.1.1 - alpha 29 November 2009 cif2xml is a fortran program using CIFtbx2 to copy a CIF on standard ------- input to an equivalent XML on standard output, while checking data names against dictionaries and reformating numbers with esd's to conform to the rule of 19. A quasar-style request list may be specified, otherwise the entire CIF is copied. The XML output may be literally derived from the CIF input, or transformations may be specified in a dictionary. The declarations required for the XML document may either be embedded in the new document, written to an external DTD, or referred to an existing file. This program is based on cif2cif, and differs from the program primarily in the format of the output. cif2xml by Copyright (c) 2000, 2009 Herbert J. Bernstein (yaya@bernstein-plus-sons.com) Bernstein + Sons 5 Brewster Lane Bellport, NY 11713, U.S.A. This program is part of the Bernstein+Sons xmlCIF project (H. J. Bernstein and F. C. Bernstein). See http://www.bernstein-plus-sons.com/software/xmlCIF. In order to ensure continuing availability of source code and documentation cif2xml and its documentation are subject to copyright. This does not prevent you from using the program, from making copies and changes, but prevents the creation of "closed source" versions out of the open source versions. See NOTICE. Science is best served when the tools we use are fully understood by those who wield those tools and by those who make used of results obtained with those tools. When a scientific tool exists as software, access to source code is an important element in achieving full understanding of that tool. As our field evolves and new versions of software are required, access to source allows us to adapt our tools quickly and effectively. In the early days of software development, most scientific software source code was freely and openly shared with a minimum of formalities. These days, it appears that carefully drawn legal documents are necessary to protect free access to the source code of scientific software. We are all deeply indebted to Richard Stallman for showing us how a creative combination of copyrights and seemingly restrictive licenses could give us truly unfettered freedom to use programs, to read their source code and to develop new versions. The GNU project, and the Linux project have shown that an open source approach works. We use the GNU General Public License (the "GPL") for our program. Older releases use the license from OpenRasmol. The OpenRasMol conditions for use have correctly been called "GPL-like". If you are a user of this program, you will find that the copyrights and notices ask little more of you than that you avoid mistakes by others by keeping the notices with copies, display scientific integrity by citing your sources properly and treating this like other shared scientific developments by not inferring a warranty. If you are a software developer and wish to incorporate what you find here into new code, or to pick up bits and pieces and used them in another context, the situation becomes more complex. Read the copyrights and notices carefully. You will find that they are "infectious". Whatever you make from our Open Source code must itself be offered as Open Source code. In addition, in order to allow users to understand what has changed and to ensure orderly development you have to describe your changes. ---------------------------------------------------------------------------- cif2xml reads the input CIF from the standard input device (normally device 5). An optional STAR data name dictionary (in DDL format) is opened. A reformatted copy of the input CIF is written to standard output (device 6). Messages are output to the standard error device (normally device 0). Note that the PARAMETER 'MAXBUF' should contain the maximum number of char- acters contained on a single text line. The default value is 200. If a request list (a file listing data_ block names and tags) is provided that list controls the ordering and selection of tags and values to copy. Otherwise the entire CIF is copied in the order presented In a unix-like environment, the program is run as: cif2xml [-i input_cif] [-o output_xml] [-d dictionary] [-c catck]\ [-f command_file] [-e esdlim_] [-a aliaso_] [-p prefix]\ [-t tabl_] [-q request_list] [-b {row|col} ] [-x {xfer|keep|zap}]\ [-u {drop|insert}] [-s {inline | referto spec_dtd | writeto spec_dtd} ] \ [input_cif [output_xml [dictionary [request_list [spec_dtd ]]]]] where: input_cif defaults to $CIF2XML_INPUT_CIF or stdin output_xml defaults to $CIF2XML_OUTPUT_XML or stdout dictionary defaults to $CIF2XML_CHECK_DICTIONARY (multiple dictionaries may be specified) request_list defaults to $CIF2XML_REQUEST_LIST input_cif of "-" is stdin, output_xml of "-" is stdout request_list of "-" is stdin -e has integer values (e.g. 9, 19(default) o 29) -a has values of t or 1 or y vs. f or 0 or n -p has string values in which "_" is replaced by blank -t has values of t or 1 or y vs. f or 0 or n, default f -s defaults to inline, -b defaults to col -x defaults to zap, -u to drop Note: The options -s inline and -s writeto spec_dtd are not implemented in this release. The basic approach is to map categories into an outer level of XML tags and individual tags into the next level down the tree. Three new dictionary tags are defined to allow for mapping of CIF categories and tags to XML entity names: _xml_mapping.token gives the CIF token to be mapped _xml_mapping.token_type gives the type of CIF token _xml_mapping.target gives the string to be used in xml The mapping is optionally by rows or by columns. Mapping by columns is the default because it allows a much high density of data versus tags. Here is the beginning of the cell information from 1crn as mapped by cif2xml: 1CRN 40.96 18.65 22.52 90. 90.77 90. ... Note the non-CML tag cell.entry_id included. cif2xml allows for request lists so that such tags may be excluded, but, for use with Jmol, there is no need to exclude them. The output of cif2xml when used to produce data by columns agrees with the output of the BioDOM program pdb2xml [Moore 99] for such non-looped data. For coordinate lists the higher information density of the cif2xml output results in faster dataset reading and display when used with Jmol. 1. INSTALLATION Here is the recommended procedure for implementing and testing this version of cif2xml. 1.0. Before you try to install this version of cif2xml *** ========================================================== *** *** ========================================================== *** *** ==>>> You must have ciftbx version 2.6.4 or greater <<<== *** *** ==>>> installed in a directory named ciftbx.src. <<<== *** *** ==>>> The scripts mkdecompln and rmdecompln, which <<<== *** *** ==>>> come with ciftbx, must be installed in the <<<== *** *** ==>>> top level directory and executable. <<<== *** *** ==>>> To test cif2xml, you must have a compressed <<<== *** *** ==>>> copy of the dictionary cif_mm.dic in a <<<== *** *** ==>>> directory named dictionaries. <<<== *** *** ========================================================== *** *** ========================================================== *** The directory structure within which you will work is top level directory ------------------- | | ------------------------------ | | | dictionaries ciftbx.src cif2xml.src ------------ ---------- ----------- You may have acquired this package in one of several forms. The most likely are as a "C-shell Archive," a "Shell Archive", or as separate files. The idea is to get to separate files, all in the same directory, named cif2xml.src, parallel to the directory ciftbx.src, but let's start with the possibility that you got the package as one big file, i.e. in one of the archive file formats. Place the archive in the top level directory. *** ========================================================== *** *** ========================================================== *** *** ==>>> The files in this kit will unpack into a <<<== *** *** ==>>> directory named cif2xml.src. It is a good idea<<<== *** *** ==>>> to save the current contents of cif2xml.src <<<== *** *** ==>>> and then to make the directory empty <<<== *** *** ========================================================== *** *** ========================================================== *** If you are on a machine which does not provide a unix-like shell, you will need to take apart the archive by hand using a text editor. We'll get to that in a moment. 1.1. ON A UNIX MACHINE If you have the shell archive on a unix machine, follow the instructions at the front of the archive, i.e. save the uncompressed archive file as "file", then, if the archive is a "Shell Archive" execute "sh file". If the archive is a "C-Shell Archive" execute "csh file". 1.2. IF YOU DON'T HAVE UNIX If sh or csh are not available, then it is best to start with the "C-Shell Archive" and do the steps that follow. If you must use the "Shell Archive" you should be aware that the lines you want to extract have been prefixed with "X", while most of the lines you want to discard have not. For a "C-Shell Archive" such prefixes are rare and the file is easier to read. Assume you have a "C-Shell Archive". Use your editor to separate the different parts of the file into individual files in your workspace. Each part starts with a lot of unixisms, then several blank lines and then two lines which identify the file, and most importantly, contain the text "CUT_HERE_CUT_HERE_CUT_HERE" You can look at the line before and the line after to see if you are at the head or tail of a file. Use your editor to search for the "CUT_HERE" lines. Each part is carefully labeled and indicates the recommended filename for the separated file. On some machines these filenames may need to be altered to suit the OS or compiler. 1.3. MANIFEST The partitions are as follows: part filename description 1 COPYING GPL (GNU General Public License) 2 NOTICE Notices 3 cif2xml.src/README.cif2xml additional information on cif2xml 4 cif2xml.src/MANIFEST a list of files in the kit 5 cif2xml.src/Makefile a preliminary control file for make 6 cif2xml.src/4ins.cif example mmcif file used to test cif2xml 7 cif2xml.src/4ins.out example XML output from test of cif2xml 8 cif2xml.src/4ins.prt example list file from test of cif2xml 9 cif2xml.src/cif_cml.dic example of CML mapping definitions 10 cif2xml.src/cif2xml.cmn cif2xml common block 11 cif2xml.src/cif2xml.f cif2xml fortran source 12 cif2xml.src/xtalt2.cif example cif file used to test cif2xml 13 cif2xml.src/xtalt2.out example XML output from test of cif2xml 14 cif2xml.src/xte29.out example XML output from test of cif2xml 15 cif2xml.src/xttne9.out example XML output from test of cif2xml 2. COMPILING AND EXECUTING Here are the recommended steps for a UNIX system. Vary this according to the requirements of your OS and compiler. You will simplest to work if you place the cif2xml files together in a common subdirectory named 'cif2xml.src'. Be very careful if you place them in a directory with other files, since some of the build and test instructions remove or overwrite existing files, especially with extensions such as '.o', '.lst', or '.diff'. On a UNIX system, most of what you need to do to build and test cif2xml is laid out in Makefile. *** Be sure to examine and edit this file appropriately before using it.*** But, once properly edited, all you should need to do is 'make clean' to remove old object files, 'make all' to build new version of 'cif2xml' and 'make tests' to test what you have built. For non-UNIX-like environments, you will have to provide replacements for iargc, getarg and getenv. The following are reasonable possibilities: integer function iargc(dummy) iargc=0 return end subroutine getarg(narg,string) integer narg character*(*) string string=char(0) return end subroutine getenv(evar,string) character*(*) evar,string string=char(0) if(evar.eq.'CIF2XML_INPUT_CIF') * string='INPCIF.CIF'//char(0) if(evar.eq.'CIF2XML_OUTPUT_XML') * string='OUTXML.XML'//char(0) if(evar.eq.'CIF2XML_CHECK_DICTIONARY') * string='CIF_CORE.DIC'//char(0) if(evar.eq.'CIF2XML_REQUEST_LIST') * string='REQLST.DAT'//char(0) return end This combination of substitute routines would "wire-in" cif2xml to read its input cif from a file named INPCIF.CIF, write its output cif to a file named OUTXML.CIF, check names against CIF_CORE.DIC and use the tag names given in REQLST.DAT to selects the ones to copy FILES USED dictionary input input on device 2 Reformatted CIF output on device 6 ('stdout') Input CIF input on device 2, if a file, 5 if 'stdin' Message device output on device 0 ('stderr') Direct access in/out on device 3 Request list input on device 4, if a file, 5 if 'stdin' TEST files Three test CIFs are provided. xtal2.cif is a test file borrowed from xtal_gx (file xtest2.cif at ftp://ftp.crystal.uwa.edu.au/free/test., provided by S. R. Hall. 4ins.cif is an mmCIF file created from the PDB entry 4INS by G.G. Dodson, E. J. Dodson, D. C. Hodgkin, N.W. Isaacs and M. Vijayan (1989) by the program pdb2cif (P.E. Bourne, F.C. Bernstein and H.J. Bernstein, 1996, see http://ndbserver.rutgers.edu/software). xtalt2.cif provides good test cases for the conversion of esd's. The command cif2xml -t y < xtalt2.cif > xtalt2.new ensures that all esd's follow the rule of 19, while cif2xml -t y -e 29 < xtalt2.cif > xte29.new converts esd's to the rule of 29. The difference between the two rules is that for the rule of 19, all esd's lie between 2 and 19, so that an esd of (1) has to be converted to (10), while for the rule of 29, all esd's lie between 3 and 29, so that an esd of (2) also has to be converted, in this case to (20). The option "-t y" tidies the output to tab stops. One last test with this file is to use the command cif2xml -e 9 < xtalt2.cif > xttne9.new to copy the original cif spacing and to use the rule of 9 on esd's 4ins.cif has many comments, text fields and dense loops. The test in the Makefile tests handling of these items and adds the additional complication of processing a prefix ".._" with the command cif2xml -t y -p .._ < 4ins.cif > 4ins.new The output spacing is controlled by the program. If we wish to map tags to an essential subset of the CML XML tags, we can use the command cif2xml -d cif_mm.dic -d cif_sml.dic -s referto cml.dtd \ < 4ins.cif > 4ins.new CHANGES KNOWN PROBLEMS cif2xml does not copy white space exactly, and will reformat some data values. Some aspect of this are inherent in the differences between CIF and XML. Always compare the original to the output. XML does not allow multiple root elements. cif2xml maps the first DATA_ block encountered to the root element. This can cause problems for XML parsers if multiple DATA_ block appear in the input CIF. The code used by xml2cif to write DTDs is not ready for release, and has not been included. References * [Bernstein et al. 98] Bernstein, H.J.,Bernstein, F.C., Bourne, P.E. "pdb2cif: Translating PDB Entries into mmCIF Format", J. Appl. Cryst., 31, pp. 282-295, 1998, software available from http://www.iucr.org/iucr-top/cif and http://ndbserver.rutgers.edu. * [Bray, Paoli, Sperberg-McQueen 98] Bray, T., Paoli, J., Sperberg, C. M., eds, "Extensible Markup Language (XML)", W3C Recommendation 10-Feb-98, REC-xml-19980210, http://www.w3.org/TR/1998/REC-xml-19980210 * [Fitzgerald et al. 96] Fitzgerald, P. M. D., Berman, H. M., Bourne, P. E., McMahon, B., Watenpaugh, K., Westbrook, J. "The mmCIF Dictionary: Community Review and Final Approval", 17th IUCR Congress and General Assembly, Seattle, Washington, USA, 8-17 August 1996, Abstract E1226. Version 0.8.02 available from http://ndbserver.rutgers.edu. * [Gezelter 99] Gezelter, D., "Jmol" and open source Java program. See http://www.openscience.org/jmol. * [Hall, Allen, Brown 91] Hall,S. R. Allen, F. H., Brown, I. D., "The Crystallographic Information File (CIF): A New Standard Archive File for Crystallography", Acta Cryst. A47, 655-685 (1991), http://www.us.iucr.org/iucr-top/cif/standard/cifstd1.html. * [Hall, Bernstein 96] Hall, S.R., Bernstein, H.J., "CIFtbx2: Extended Tool Box for Manipulating CIFs," J. Appl. Cryst., 29, pp 598-603 (1996). * [Hendrickson, Teeter 81] Hendrickson, W. A., Teeter, M. M., "Crambin", PDB Entry 1CRN. See also Teeter, M. M., "Water Structure Of A Hydrophobic Protein At Atomic Resolution. Pentagon Rings Of Water Molecules In Crystals Of Crambin", Proc. Nat. Acad. Sci., USA, 81, 6014 ff. (1984). * [Longridge 98] Longridge, J. J., "Tetrasodium Hexacyanoferrate(II) Decahydrate", Acta Cryst. C54, 1998, CIF-Access paper, IUCR9800028.cif. * [Moore 99] Moore, A., "pdb2xml", March 1999, released as pdb2xml-protbot.pl on the BioDOM website, http://ala.vsms.nottingham.ac.uk/biodom/software/protsuite-user-dist/ * [Murray-Rust, Rzepa 99] Murray-Rust, P., Rzepa, H., "Chemical markup, XML and the WWW, Part I: Basic principles," J. Chem. Inf . Comp. Sci, 39 No. 6, 928-942,(1999). See http://www.xml-cml.org ---------------------------------------------------------------------------- Updated 29 November 2009 yaya@bernstein-plus-sons.com